A. php注冊發郵件
用mail函數。
有本書專門有這個例子的
中文版叫《php 6與mysql 5基礎教程》
很好的。
http://www.dmcinsights.com/phpmysql3 網站源碼
B. php 怎樣做到注冊時順便郵件發送，希望大家
舉例用戶注冊的時候會提交一些表單包含用戶的身份信息，
判斷這些身份信息是否安全及符合要求，如果是
把這些信息入庫
找一個順手的PHP郵件類(phpmailer)，實例化->發送;
然後，不符合要求的如何處理。。。
C. php郵件發送怎麼弄
伺服器上要裝個郵件系統 像sendmail 然後用php原生的mail函數就能發郵件了
D. php如何發送郵件
你好，用這個郵件類，需要在調用時，填寫一個smtp伺服器和你的用戶名密碼。
<?php
set_time_limit(600);
/*
* 郵件發送類
*/
class smail {
//您的SMTP 伺服器供應商，可以是域名或IP地址
var $smtp = "";
//SMTP需要要身份驗證設值為 1 不需要身份驗證值為 0，現在大多數的SMTP服務商都要驗證，如不清楚請與你的smtp 服務商聯系。
var $check = 1;
//您的email帳號名稱
var $username = "";
//您的email密碼
var $password = "";
//此email 必需是發信伺服器上的email
var $s_from = "";
/*
* 功能：發信初始化設置
* $from 你的發信伺服器上的郵箱
* $password 你的郵箱密碼
* $smtp 您的SMTP 伺服器供應商，可以是域名或IP地址
* $check SMTP需要要身份驗證設值為 1 不需要身份驗證值為 0，現在大多數的SMTP服務商都要驗證
*/
function smail ( $from, $password, $smtp, $check = 1 ) {
if( preg_match("/^[^\d\-_][\w\-]*[^\-_]@[^\-][a-zA-Z\d\-]+[^\-](\.[^\-][a-zA-Z\d\-]*[^\-])*\.[a-zA-Z]{2,3}/", $from ) ) {
$this->username = substr( $from, 0, strpos( $from , "@" ) );
$this->password = $password;
$this->smtp = $smtp ? $smtp : $this->smtp;
$this->check = $check;
$this->s_from = $from;
}
}
/*
* 功能：發送郵件
* $to 目標郵箱
* $from 來源郵箱
* $subject 郵件標題
* $message 郵件內容
*/
function send ( $to, $from, $subject, $message ) {
//連接伺服器
$fp = fsockopen ( $this->smtp, 25, $errno, $errstr, 60);
if (!$fp ) return "聯接伺服器失敗".__LINE__;
set_socket_blocking($fp, true );
$lastmessage=fgets($fp,512);
if ( substr($lastmessage,0,3) != 220 ) return "錯誤信息1:$lastmessage".__LINE__;
//HELO
$yourname = "YOURNAME";
if($this->check == "1") $lastact="EHLO ".$yourname."\r\n";
else $lastact="HELO ".$yourname."\r\n";
fputs($fp, $lastact);
$lastmessage == fgets($fp,512);
if (substr($lastmessage,0,3) != 220 ) return "錯誤信息2:$lastmessage".__LINE__;
while (true) {
$lastmessage = fgets($fp,512);
if ( (substr($lastmessage,3,1) != "-") or (empty($lastmessage)) )
break;
}
//身份驗證
if ($this->check=="1") {
//驗證開始
$lastact="AUTH LOGIN"."\r\n";
fputs( $fp, $lastact);
$lastmessage = fgets ($fp,512);
if (substr($lastmessage,0,3) != 334) return "錯誤信息3:$lastmessage".__LINE__;
//用戶姓名
$lastact=base64_encode($this->username)."\r\n";
fputs( $fp, $lastact);
$lastmessage = fgets ($fp,512);
if (substr($lastmessage,0,3) != 334) return "錯誤信息4:$lastmessage".__LINE__;
//用戶密碼
$lastact=base64_encode($this->password)."\r\n";
fputs( $fp, $lastact);
$lastmessage = fgets ($fp,512);
if (substr($lastmessage,0,3) != "235") return "錯誤信息5:$lastmessage".__LINE__;
}
//FROM:
$lastact="MAIL FROM: <". $this->s_from . ">\r\n";
fputs( $fp, $lastact);
$lastmessage = fgets ($fp,512);
if (substr($lastmessage,0,3) != 250) return "錯誤信息6:$lastmessage".__LINE__;
//TO:
$lastact="RCPT TO: <". $to ."> \r\n";
fputs( $fp, $lastact);
$lastmessage = fgets ($fp,512);
if (substr($lastmessage,0,3) != 250) return "錯誤信息7:$lastmessage".__LINE__;
//DATA
$lastact="DATA\r\n";
fputs($fp, $lastact);
$lastmessage = fgets ($fp,512);
if (substr($lastmessage,0,3) != 354) return "錯誤信息8:$lastmessage".__LINE__;
//處理Subject頭
$head="Subject: $subject\r\n";
$message = $head."\r\n".$message;
//處理From頭
$head="From: $from\r\n";
$message = $head.$message;
//處理To頭
$head="To: $to\r\n";
$message = $head.$message;
//加上結束串
$message .= "\r\n.\r\n";
//發送信息
fputs($fp, $message);
$lastact="QUIT\r\n";
fputs($fp,$lastace);
fclose($fp);
return 0;
}
}
// 發送示例
// 只需要把這部分改成你的信息就行
$sm = new smail( "用戶名", "密碼", "發件smtp伺服器" );
$end = $sm->send( "收件人", "發件人(可以偽造哦)", "標題", "內容" );
if( $end ) echo $end;
else echo "發送成功！$x";
?>
E. PHP網站中，如何自動的向剛注冊的新用戶發送郵件
如果你的伺服器有發郵件的功能，那就注冊完後，把用戶名密碼EMAIL地址寫如資料庫，再直接把用戶名密碼EMAIL地址通過mail()發出去……
不能發郵件的話，就用別的SMTP伺服器發……
F. PHP如何實現注冊自動發送至youxiang激活操作
網路搜一下,好像有個發送郵件類
注冊時生成一個文件或者生成一個隨機碼寫入資料庫,然後將激活地址發送給用戶郵箱
通過注冊時的激活碼驗證通過然後寫入用戶信息就行了
G. php中怎樣寫自動發送郵件
思路是這樣
php端寫好發送郵件的代碼
可以參考phpMailer
php是不能實現自動發送，除非你給他一個請求如注冊時，發送郵件驗證，也是有注冊請求才發送的
一版都是在伺服器端 執行你寫好的PHP文件，比如linux的任務計劃功能
H. php怎麼實現發送郵件
PHP發送郵件是「非常的簡單」 因為他提供了mail()函數直接發送，但配置相當麻煩 （1）通過mail()函數發送郵件 mail() 配置PHP.ini 郵件信息 需要類似sendmail這樣的組件支持 （2）通過socket通訊，使用SMTP傳輸 socket連接->SMTP通訊->獲取通訊消息->發送 mail函數的使用 mail() 函數允許您從腳本中直接發送電子郵件。 如果郵件的投遞被成功地接收，則返回 true，否則返回 mail(to,subject,message,headers,parameters) socket方式發送原理 給你一個別人寫好的類 用法在下面 本人經測試很多網站都不提供免費的smtp服務（126、sina、netease 這幾個試過了），騰訊郵箱支持此功能。 用法： <? require_once ('email.class.php'); //########################################## $smtpserver = "smtp.163.com";//SMTP伺服器 $smtpserverport =25;//SMTP伺服器埠 $smtpusermail = "";//SMTP伺服器的用戶郵箱 $smtpemailto = "";//發送給誰 $smtpuser = "";//SMTP伺服器的用戶帳號 $smtppass = "";//SMTP伺服器的用戶密碼 $mailsubject = "PHP100測試郵件系統";//郵件主題 $mailbody = "<h1> 這是一個測試程序 PHP100.com </h1>";//郵件內容 $mailtype = "HTML";//郵件格式（HTML/TXT）,TXT為文本郵件 ########################################## $smtp = new smtp($smtpserver,$smtpserverport,true,$smtpuser,$smtppass);//這裡面的一個true是表示使用身份驗證,否則不使用身份驗證. $smtp->debug = FALSE;//是否顯示發送的調試信息 $smtp->sendmail($smtpemailto, $smtpusermail, $mailsubject, $mailbody, $mailtype); ?> 郵件發送類 <? class smtp { /* Public Variables */ var $smtp_port; var $time_out; var $host_name; var $log_file; var $relay_host; var $debug; var $auth; var $user; var $pass; /* Private Variables */ var $sock; /* Constractor */ function smtp($relay_host = "", $smtp_port = 25,$auth = false,$user,$pass) { $this->debug = FALSE; $this->smtp_port = $smtp_port; $this->relay_host = $relay_host; $this->time_out = 30; //is used in fsockopen() # $this->auth = $auth;//auth $this->user = $user; $this->pass = $pass; # $this->host_name = "localhost"; //is used in HELO command $this->log_file =""; $this->sock = FALSE; } /* Main Function */ function sendmail($to, $from, $subject = "", $body = "", $mailtype, $cc = "", $bcc = "", $additional_headers = "") { $mail_from = $this->get_address($this->strip_comment($from)); $body = ereg_replace("(^|(\r\n))(\\.)", "\\1.\\3", $body); $header .= "MIME-Version:1.0\r\n"; if($mailtype=="HTML"){ $header .= "Content-Type:text/html\r\n"; } $header .= "To: ".$to."\r\n"; if ($cc != "") { $header .= "Cc: ".$cc."\r\n"; } $header .= "From: $from<".$from.">\r\n"; $header .= "Subject: ".$subject."\r\n"; $header .= $additional_headers; $header .= "Date: ".date("r")."\r\n"; $header .= "X-Mailer:By Redhat (PHP/".phpversion().")\r\n"; list($msec, $sec) = explode(" ", microtime()); $header .= "Message-ID: <".date("YmdHis", $sec).".".($msec*1000000).".".$mail_from.">\r\n"; $TO = explode(",", $this->strip_comment($to)); if ($cc != "") { $TO = array_merge($TO, explode(",", $this->strip_comment($cc))); } if ($bcc != "") { $TO = array_merge($TO, explode(",", $this->strip_comment($bcc))); } $sent = TRUE; foreach ($TO as $rcpt_to) { $rcpt_to = $this->get_address($rcpt_to); if (!$this->smtp_sockopen($rcpt_to)) { $this->log_write("Error: Cannot send email to ".$rcpt_to."\n"); $sent = FALSE; continue; } if ($this->smtp_send($this->host_name, $mail_from, $rcpt_to, $header, $body)) { $this->log_write("E-mail has been sent to <".$rcpt_to.">\n"); } else { $this->log_write("Error: Cannot send email to <".$rcpt_to.">\n"); $sent = FALSE; } fclose($this->sock); $this->log_write("Disconnected from remote host\n"); } echo "<br>"; echo $header; return $sent; } /* Private Functions */ function smtp_send($helo, $from, $to, $header, $body = "") { if (!$this->smtp_putcmd("HELO", $helo)) { return $this->smtp_error("sending HELO command"); } #auth if($this->auth){ if (!$this->smtp_putcmd("AUTH LOGIN", base64_encode($this->user))) { return $this->smtp_error("sending HELO command"); } if (!$this->smtp_putcmd("", base64_encode($this->pass))) { return $this->smtp_error("sending HELO command"); } } # if (!$this->smtp_putcmd("MAIL", "FROM:<".$from.">")) { return $this->smtp_error("sending MAIL FROM command"); } if (!$this->smtp_putcmd("RCPT", "TO:<".$to.">")) { return $this->smtp_error("sending RCPT TO command"); } if (!$this->smtp_putcmd("DATA")) { return $this->smtp_error("sending DATA command"); } if (!$this->smtp_message($header, $body)) { return $this->smtp_error("sending message"); } if (!$this->smtp_eom()) { return $this->smtp_error("sending <CR><LF>.<CR><LF> [EOM]"); } if (!$this->smtp_putcmd("QUIT")) { return $this->smtp_error("sending QUIT command"); } return TRUE; } function smtp_sockopen($address) { if ($this->relay_host == "") { return $this->smtp_sockopen_mx($address); } else { return $this->smtp_sockopen_relay(); } } function smtp_sockopen_relay() { $this->log_write("Trying to ".$this->relay_host.":".$this->smtp_port."\n"); $this->sock = @fsockopen($this->relay_host, $this->smtp_port, $errno, $errstr, $this->time_out); if (!($this->sock && $this->smtp_ok())) { $this->log_write("Error: Cannot connenct to relay host ".$this->relay_host."\n"); $this->log_write("Error: ".$errstr." (".$errno.")\n"); return FALSE; } $this->log_write("Connected to relay host ".$this->relay_host."\n"); return TRUE;; } function smtp_sockopen_mx($address) { $domain = ereg_replace("^.+@([^@]+)$", "\\1", $address); if (!@getmxrr($domain, $MXHOSTS)) { $this->log_write("Error: Cannot resolve MX \"".$domain."\"\n"); return FALSE; } foreach ($MXHOSTS as $host) { $this->log_write("Trying to ".$host.":".$this->smtp_port."\n"); $this->sock = @fsockopen($host, $this->smtp_port, $errno, $errstr, $this->time_out); if (!($this->sock && $this->smtp_ok())) { $this->log_write("Warning: Cannot connect to mx host ".$host."\n"); $this->log_write("Error: ".$errstr." (".$errno.")\n"); continue; } $this->log_write("Connected to mx host ".$host."\n"); return TRUE; } $this->log_write("Error: Cannot connect to any mx hosts (".implode(", ", $MXHOSTS).")\n"); return FALSE; } function smtp_message($header, $body) { fputs($this->sock, $header."\r\n".$body); $this->smtp_debug("> ".str_replace("\r\n", "\n"."> ", $header."\n> ".$body."\n> ")); return TRUE; } function smtp_eom() { fputs($this->sock, "\r\n.\r\n"); $this->smtp_debug(". [EOM]\n"); return $this->smtp_ok(); } function smtp_ok() { $response = str_replace("\r\n", "", fgets($this->sock, 512)); $this->smtp_debug($response."\n"); if (!ereg("^[23]", $response)) { fputs($this->sock, "QUIT\r\n"); fgets($this->sock, 512); $this->log_write("Error: Remote host returned \"".$response."\"\n"); return FALSE; } return TRUE; } function smtp_putcmd($cmd, $arg = "") { if ($arg != "") { if($cmd=="") $cmd = $arg; else $cmd = $cmd." ".$arg; } fputs($this->sock, $cmd."\r\n"); $this->smtp_debug("> ".$cmd."\n"); return $this->smtp_ok(); } function smtp_error($string) { $this->log_write("Error: Error occurred while ".$string.".\n"); return FALSE; } function log_write($message) { $this->smtp_debug($message); if ($this->log_file == "") { return TRUE; } $message = date("M d H:i:s ").get_current_user()."[".getmypid()."]: ".$message; if (!@file_exists($this->log_file) || !($fp = @fopen($this->log_file, "a"))) { $this->smtp_debug("Warning: Cannot open log file \"".$this->log_file."\"\n"); return FALSE; } flock($fp, LOCK_EX); fputs($fp, $message); fclose($fp); return TRUE; } function strip_comment($address) { $comment = "\\([^()]*\\)"; while (ereg($comment, $address)) { $address = ereg_replace($comment, "", $address); } return $address; } function get_address($address) { $address = ereg_replace("([ \t\r\n])+", "", $address); $address = ereg_replace("^.*<(.+)>.*$", "\\1", $address); return $address; } function smtp_debug($message) { if ($this->debug) { echo $message."<br>"; } } function get_attach_type($image_tag) { // $filedata = array(); $img_file_con=fopen($image_tag,"r"); unset($image_data); while ($tem_buffer=AddSlashes(fread($img_file_con,filesize($image_tag)))) $image_data.=$tem_buffer; fclose($img_file_con); $filedata['context'] = $image_data; $filedata['filename']= basename($image_tag); $extension=substr($image_tag,strrpos($image_tag,"."),strlen($image_tag)-strrpos($image_tag,".")); switch($extension){ case ".gif": $filedata['type'] = "image/gif"; break; case ".gz": $filedata['type'] = "application/x-gzip"; break; case ".htm": $filedata['type'] = "text/html"; break; case ".html": $filedata['type'] = "text/html"; break; case ".jpg": $filedata['type'] = "image/jpeg"; break; case ".tar": $filedata['type'] = "application/x-tar"; break; case ".txt": $filedata['type'] = "text/plain"; break; case ".zip": $filedata['type'] = "application/zip"; break; default: $filedata['type'] = "application/octet-stream"; break; } return $filedata; } } ?>
I. php+mysql 做一個注冊頁面 注冊成功後給用戶郵箱發一份確認郵件，發送郵件的代碼怎麼加到下面的代碼里了
加到exit（『注冊成功』）；那裡
可以下載個phpmailer
下面一個testdemo，你可以試試！
<?php
include "./PHPMailer/class.phpmailer.php";
function PHPsendMail($username,$password,$host,$addresses,$title='',$fromname='',$content='',$body=''){
$mail = new PHPMailer();//實例化
$mail->IsSMTP();//設置mailer使用smtp模式
$mail->Host = $host;//smtp伺服器
$mail->SMTPAuth = true;//轉換成smtp模式
$mail->Username = $username;//smtp 用戶
$mail->Password = $password;//smtp 密碼
$mail->From = $username;//發送郵件的郵箱
$mail->FromName = $fromname;//發送郵件的用戶名
$mail->Mailer = "smtp";
//$mail->IsHTML(true);
$mail->Subject = $title;//標題
$mail->Body = $content; //發送內容
$mail->AltBody = $body;
if($addresses){
if(is_array($addresses)){
foreach($addresses as $address){
$mail->AddAddress($address,'');
if(!$mail->Send())
{
echo "Message could not be sent. <p>";
echo "Mailer Error: " . $mail->ErrorInfo;
exit;
}
echo "Message has been sent";
}
}else{
$mail->AddAddress($addresses, "");
if(!$mail->Send())
{
echo "Message could not be sent. <p>";
echo "Mailer Error: " . $mail->ErrorInfo;
exit;
}
echo "Message has been sent";
}
}
}
$array = array('[email protected]','[email protected]');
PHPsendMail('[email protected]','80300838397','smtp.qq.com','[email protected]','abc','abc','親愛噠!!','bbbbb');
J. PHP 如何編寫用戶注冊後自動發送郵件到用戶郵箱
1、進入自己已有的郵箱，設置帳戶，選擇「開啟POP3/SMTP服務」並保存更改。我就哪我現有設置好的郵箱給大家演示（註：我用的是騰訊企業郵箱，特別注意我畫紅部分，第一個必要設置就是在郵箱里設置：開啟POP/SMTP服務，第二個就是必要獲取POP伺服器的信息），如圖： 2、進入dede後台，系統，系統基本參數，核心設置，配置好郵箱發信的信息．以下是我的配置（說明和如演示圖）：是否啟用smtp方式發送郵件：是．smtp伺服器：smtp.exmail.qq.com（註：因為我用的是QQ企業郵箱，所以可以參照上圖演示第二個畫紅部分．POP伺服器為：我所填寫的：smtp.exmail.qq.com，一般這個POP伺服器的填寫不是亂填，請一定要參考你使用的郵箱他們所在的POP伺服器．）smtp伺服器埠：25（一般這個不需要可以去修改改變．默認為：25）SMTP伺服器的用戶郵箱：[email protected]（這里填寫完整的郵箱地址）SMTP伺服器的用戶帳號：webmaster（這里填寫郵箱開頭的賬戶也就是用戶名）SMTP伺服器的用戶密碼：123456（密碼就不用多說了）3.進入dede後台，系統，系統基本參數，會員設置，在「會員使用許可權開通狀態(-10郵件驗證-1手工審核,0沒限制)」填-10如圖：教程演示操縱到這里，已經可以收到郵件了