❶ 怎么在电脑DOS里面设置网络
在电脑DOS环境下设置网络的步骤如下：
1. 打开命令提示符。在DOS环境下，输入命令"ipconfig"来查看当前的IP设置。
```
C:\>ipconfig
```
this will display the current IP configuration, including the IP address, subnet mask, and default gateway.
2. 使用"netsh"命令来配置网络接口。输入以下命令进入"netsh"的接口子命令。
```
netsh>interface
```
3. 在接口子命令下，使用"ip"子命令来设置IP地址。对于本地连接，使用静态IP地址设置。
```
interface>ip>set
```
Then, set the IP address, subnet mask, and default gateway for the local connection. For example:
```
interface ip>set address "本地连接" static 192.168.0.2 255.255.255.0 192.168.0.1
```
This command sets the IP address to 192.168.0.2, the subnet mask to 255.255.255.0, and the default gateway to 192.168.0.1.
4. 确认更改后的IP地址是否正确，再次输入"ipconfig"命令。
```
C:\>ipconfig
```
This will verify that the IP address has been changed successfully.
5. Explore additional commands and functionalities available within the "netsh" context, such as changing the DNS server or WINS server settings.
```
netsh>?
```
This will display a list of available commands and subcontexts within the "netsh" interface.
By following these steps, you can configure the network settings in a DOS environment on your computer.
❷ dos网络命令
以下是有三种情况
第一种，查看本地计算机详细网络配置信息
1.开始运行对话框内输入CMD回车
2.DOS命令窗口中输入ipconfig/all回车返回所有适配器的IP地址,子网掩码,默认网关,主机相关配置信息等信息
第二种，本地详细网络配置信息保存到文档
1.同时按键盘WIN+R对话框内输入CMD回车
2.DOS命令窗口中输入ipconfig/all>c:ipconfig.txt
3.找到C盘中新生成的ipconfig.txt
4.双击文件,打开查看
第三种，刷新DHCP协议,重新自动获取IP
1.网络中存在DHCP服务器,客户端电脑的IP地址,从DHCP服务器上获取,如何刷新DHCP协议,重新获取IP地址,先用ipconfig/release命令来丢弃IP地址配置,命令执行后,本地IP地址被置为0.0.0.0
2.再用ipconfig/renew命令来从DHCP服务上获取ip地址,执行完成后用ipconfig/all命令来查看一下